ILB2F Power Battery In-Line Connector 2 Pin Female - 600V DC/AC rms, 25A per contact (50A max). Wet-mate design at 300 bar depth with >500 mating cycles. Chloroprene rubber body, gold-plated brass contacts. For ROV power umbilicals, subsea battery charging.
The ILB2F is a SubConn Power Battery Series in-line connector featuring 2 gold-plated contacts rated for 600 V DC/AC rms at 25 A per contact (maximum 50 A per connector). The robust chloroprene rubber body and nitrile O-ring sealing system enable reliable wet-mate operation at depths up to 300 bar (4,350 psi) with more than 500 mating cycles.
| Parameter | Specification |
|---|---|
| Model | ILB2F (In-Line, Female, 2 Pin) |
| Voltage Rating | 600 V DC/AC rms |
| Current Rating | 25 A per contact (50 A max per connector) |
| Contact Resistance | < 0.01 Ohm |
| Insulation Resistance | > 200 MOhm |
| Wet Mating Cycles | > 500 |
| Depth Rating (PEEK) | 300 bar / 4,350 psi |
| Pressure Tested | 800 bar / 11,600 psi (open face) |
| Connector Body | Chloroprene rubber |
| Contacts | Gold plated brass UNS-C36000 |
| O-Rings | Nitrile |
| Cable (2芯, 2ft/60cm) | 10 AWG / 5.26 mm2 synthetic rubber |
| Colour Code | 1:Black, 2:White |
| Temperature (Water) | -4 to +60 deg C |
| Temperature (Air) | -40 to +60 deg C |
| Model | Type | Use Case |
|---|---|---|
| ILB2M | In-Line, Male | Cable-to-cable disconnect, male plug |
| ILB2F (this product) | In-Line, Female | Cable-to-cable disconnect, female socket |
| BHB2M | Bulkhead, Male | Panel feed-through, plug side |
| BHB2F | Bulkhead, Female | Panel feed-through, socket side |
Contact our engineering team for configuration guidance, volume pricing, and field-installable versions. Ships within 1-2 weeks from stock.
