PVC Insulated Single Core Low Voltage Copper Wiring Cable. 300/500V, Class 5 fine-stranded copper, 0.75–16 mm². General purpose PVC insulated copper wiring cable for low voltage building and panel wiring. Suitable for fixed installation and light flexible use in enclosures.
General purpose PVC insulated copper wiring cable for low voltage building and panel wiring. Suitable for fixed installation and light flexible use in enclosures. PVC insulation provides reliable dielectric properties at the rated voltage with good mechanical protection against abrasion and contact damage in the installation environment.
Available in a full range of cross-sections to suit every application from instrument signal wiring to power distribution, with colour options for conductor identification and country-specific colour coding requirements.
| Parameter | Value |
|---|---|
| Rated Voltage | 300/500V |
| Conductor | Class 5 fine-stranded copper |
| Cross-Sections | 0.75–16 mm² |
| Insulation | PVC |
| Max Conductor Temp | 70°C |
| Temp Range | −15°C to +70°C |
Solid (Class 1) and stranded (Class 2) conductors are for fixed installation — they must not be flexed in service. Fine-stranded (Class 5) conductors can be routed around panel corners and dressed to terminals with repeated repositioning during installation, making them the preferred choice for control panel wiring where neat routing requires bending.
Select cross-section based on the higher of: the current capacity requirement (per IEC 60364-5-52 derating tables) and the voltage drop limit (typically 3% for final circuits). For long cable runs, voltage drop often dictates a larger cross-section than current capacity alone would require.
