Flat Festoon Cable for Crane | PLANOFLEX NGFLGOEU 300/500V VDE UL GOST-R

Flat festoon cable for crane trolley systems. Type NGFLGOEU (PLANOFLEX). 300/500V, EPR insulation, CR rubber sheath, 180 m/min. VDE registered, UL listed, GOST-R. 3–42 cores 1.5–2.5 mm².

Flat Festoon Cable for Crane Trolley Systems — PLANOFLEX Type

Flat festoon cables (type NGFLGOEU) are designed for overhead crane festoon systems where the flat cable profile provides a lower vertical clearance requirement and simplified clip mounting compared to round festoon designs. Unlike round cables, flat festoon cables bend in one plane only — parallel to the flat face — making them ideal for crane trolleys with constrained vertical dimensions or where close clip spacing is required to minimise cable sag.

The PLANOFLEX-type design uses EPR (PROTOLON) insulation and a chloroprene rubber (CR) outer sheath, approved to DIN VDE 0250-809, UL-File E 113313, and GOST-R. Individual core or pair screening is available for combined data + power flat festoon designs.


Key Design Features

  • Type: NGFLGOEU — flat construction, rubber (CR) sheath
  • Single-plane bending only — no torsion permitted
  • EPR (PROTOLON) insulation — flexible at low temperatures
  • CR (chloroprene rubber) outer sheath — oil, ozone, UV resistant
  • Conductors: ≤25 mm² extremely finely stranded class 6; >35 mm² class 5
  • Individual tinned Cu braid screen ≥60%/≥80% — optional on data pairs
  • Flat profile: height 5.5–16.1 mm; width 11.7–72.3 mm
  • Tensile: 15 N/mm²; torsion: NOT permitted; speed: 180 m/min

Electrical & Mechanical Specifications

ParameterValue
Type CodeNGFLGOEU (PLANOFLEX)
Rated Voltage300/500V (600V)
AC Test Voltage2.5 kV (5 min)
InsulationEPR PROTOLON
SheathCR rubber (5GM3)
Core Count3 – 42 cores
Cross-Section1.5 – 2.5 mm² (control); 1.5–2.5 mm² (power)
Max Conductor Temp90 °C
Max Tensile Load15 N/mm²
TorsionNot permitted — single-plane bending only
Trolley SpeedUp to 180 m/min
Flex Temp−35 °C to +80 °C
StandardsDIN VDE 0250-809; UL E113313; GOST-R

Available Configurations

DesignCoresCross-Section
Control (unscreened)3, 7, 12, 18, 24, 421.5 mm²
Power4 – 7 cores1.5 – 2.5 mm²
Screened controlCustom1.5 mm²

Typical Applications

  • Overhead crane trolley festoon — low clearance installations
  • Transfer car and shuttle festoon systems
  • Automated storage conveyor festoon wiring
  • Stage and theatre equipment overhead rigging
  • Cleanroom overhead transport system control cables
  • Export projects requiring GOST-R or UL approvals

Why Choose Flat Over Round Festoon

Reduced Vertical Clearance

Flat cable profiles are typically 30–50% less in height than equivalent round cables — important where crane runway clearance is limited by building structure.

Simplified Clip Mounting

Flat cables mount on simple two-way clips without rotation — round cables require rotating swivel clips to prevent twisting at the support points.

Triple Approval Coverage

VDE, UL, and GOST-R approvals on a single product variant eliminates the need for separate cable types for European, North American, and CIS market projects.

Flat Festoon Cable Specification
sales@rvpowergroup.com — specify trolley travel, core count, and clip spacing.

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Drum & Reeling Cable

Request a Quote