Hi-Use connector, 2 male pins & 2 female sockets potting sleeve — precision subsea electrical connector for ROV, diver, and marine instrument systems. Neoprene moulded, gold-plated contacts, 600 VDC rated. For underwater power and signal applications.
The Hi-Use connector, 2 male pins & 2 female sockets potting sleeve is a specialised subsea electrical connector or cable assembly designed for underwater power and signal applications in ROV, diver, and marine instrument systems. Built on the proven neoprene rubber moulded connector platform, it combines deep-water pressure resistance with simplified field-mating procedures — making it suitable for both permanent installation in subsea equipment and repeated mate/demate operations in ROV and diver support workflows.
All variants in this family share the core specifications of the rubber moulded connector platform: gold-plated copper alloy contacts per ASTM-B-488, Buna N 70 Durometer O-ring face seals, and neoprene elastomeric bodies that provide elastomeric pressure equalisation at full rated depth.
| Parameter | Specification |
|---|---|
| Voltage Rating | 600 VDC (higher on request) |
| Body Material | Neoprene (Chloroprene rubber), integral moulded |
| Contact Material | Copper alloy, hard gold per ASTM-B-488 |
| Seal | Buna N 70 Durometer O-Ring |
| Temperature | -55°C to +85°C |
| Application | ROV, diver umbilical, subsea lighting, sonar, hydrophone arrays |
Inspect connector faces before each mating. Clean O-ring surfaces and apply fresh silicone grease. After each subsea deployment, rinse with fresh water, inspect contacts for corrosion, and replace any O-ring showing damage or compression set. Store with dummy connectors installed on all open faces.
Custom configurations, cable lengths, jacket materials, and matching accessories available. Contact us with your system specifications for a complete connector solution.
600 VDC | Neoprene moulded | Gold contacts | ROV and diver grade
4P Hi-Use connector
Hi-USE connector is used on many products. The most common are our EMA-2 and ComRopes. The 4P has 2 pins and 2 sockets.
The 4P can be connected underwater. Roll over the alternate view images to see a pair connected.
Our Hi-Use connector is one of the most popular wet pluggable connectors available.
A potting sleeve is included with the product.
The Hi-Use has four conductors with two sockets and two pins.
It is a non-gendered that allows the same matching connector to be used on each mating component.
We use it on our ear/microphone assemblies, PowerCom/MilComs and on most of our hardwire communications lines.
We make this bare connector available for your projects. The 4P comes with the bare connector and potting sleeve.
